System Menu
5-8 OPERATION GUIDE
System Menu Operation Procedures
Follow the procedures listed below to operate in the System Menu.
1 Press Exposure Adjustment keys on both sides for
3 seconds.
System Menu will be displayed.
2
Press or to select System Menu Items.
NOTE: Each of the System Menu Items can be
selected by pressing the numeric keys.
Refer to "Procedure for Changing the Default Settings"
regarding the following.
3
After completing each operation, press or to
display 00.Setting done, and then press the
OK key.
NOTE: The message display will return to the Ready
to copy. by pressing the Reset key.
You can cancel the setting by pressing the Stop/Clear
key.
56.CoverageRepo Prints out a report that shows the number of copies
made and the average amount of toner used
(blackness ratio %) for each paper size.
--- 5-23
System Menu Items Description Available settings Reference
Page
To Next Page
Loading...
