Kyocera TASKalfa 250ci - Page 106

Basic Operation
3-34 OPERATION GUIDE
4 Enter the destination data and press [OK].
Data to be entered are as follows.
NOTE: You will be unable to send the data if you forget your login user name or login password. Contact your
administrator and check your login user name or login password.
For send to folder (SMB)
Status
10/10/2008 10:10
Use the keyboard to enter.
Backspace
Upper-case
Lower-case
No./Symbol Space
Cancel OK
Lower-case
!@#$%^&* ( ) _+˜
QWE R T Y U I O P { }
ASDFGHJKL : "
ZXCVBNM<>?
|
Input: characters
Limit: characters
0
126
Item Data to be entered
Max.
characters
Host Name* Host name or IP address of the PC to
receive the data.
Up to 64
characters
Path Path to the receiving folder such as
follows.
For example, \User\ScanData.
Up to 128
characters
Login User
Name
User name to access the PC
For example, abcdnet\james.smith
Up to 64
characters
Login
Password
Password to access the PC Up to 64
characters
* To specify a port number different from the default (139), enter using
the format “host name: port number” (e.g., SMBhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)