Basic Operation
OPERATION GUIDE 3-23
3
Reserve Copy
This function allows you to reserve the next copy job during printing.
Using this function, the original will be scanned while the machine is printing.
When the current print job ends, the reserved copy job is printed.
The procedure differs depending on the Reserve Next Priority (refer to page 8-34).
If Reserve Next Priority is set to [On]
The Copy function default screen appears on the touch panel during printing.
1 Place the originals onto the machine for reserving
copy, and configure the copy settings.
2 Press the Start key.
The machine starts scanning the originals.
When the current print job ends, the reserved copy
job is printed.
If Reserve Next Priority is set to [Off]
The Copying screen appears on the touch panel during printing.
1 Press [Reserve Next].
The default screen for copying appears.
2 Place the originals onto the machine for reserving
copy, and configure the copy settings.
3 Press the Start key.
The machine starts scanning the originals.
When the current print job ends, the reserved copy
job is printed.
To Next Page
Loading...
