Copying Functions
4-38 OPERATION GUIDE
Poster
For using this device to make copies larger than the
maximum paper size, use Poster mode to separate and
copy an enlarged image onto multiple pages.
The completed copies have overlapping areas. A single
large page can be created by pasting those areas
together.
Choose from one of the following 3 enlargement
settings.
• Copy size – The output paper size is chosen from
the following sizes. Copy is enlarged according to
the selected paper size.
• Zoom prioirty – Specify the output zoom size from
100 to 400%. Image will be output on the necessary
number of copies for the specified zoom size.
• Number of sheets – Select number of sheets to
split the image from 2, 4, or 8 sheets. Copy is
enlarged according to the selected number of
pages.
NOTE: The available original sizes are 11 × 17",
8
1/2 × 11", A3 and A4R. The available paper sizes
are 11 × 17" and A3 only.
Follow the steps as below to use poster enlargement.
1 Press Copy key.
2 Place the originals on the platen.
3 Press [Layout/Edit] and then press [Poster].
To Next Page
Loading...
