Default Setting (System Menu)
8-18 OPERATION GUIDE
Use the procedure below to select the output tray.
1 Press the System Menu key.
2 Press [Common Settings] and then [Next] of Paper
Output.
3 Press [Change] of Copy/Custom Box, Printer, or
FAX Port 1 or FAX Port 2.
NOTE: FAX Port 1 appears when the optional fax kit is
installed. If you have 2 optional fax kits installed, Fax
Port 2 appears. You can specify the output tray for the
second kit (Dual FAX).
4 Select Output Tray.
For [Finisher Tray], [Tray B], [Tray C] or [Tray 1] to
[Tray 7], select [Face Up] (print surface up) or [Face
Down] (print surface down) as the paper orientation
at output.
5 Press [OK].
6 When changing the output tray of Copy/Custom
Box, move to the copy or document box screen and
press the Reset key.
Orientation Confirmation
Select whether to display a screen for selecting the orientation of the originals to be placed on the platen when
using the following functions. (For more information, refer to page 4-11 for Original Orientation.)
•Duplex
• Margin/Centering originals
• Border erase
• Combine mode
• Memo mode
• Page numbering
• Booklets
• Staple/Punch (optional feature)
Orientation Confirmation Setting
Use the procedure below to select the default Orientation Confirmation setting.
1 Press the System Menu key.
2 Press [Common Settings] and [Change] of
Orientation Confirmation.
3 Select the default for [Off] or [On].
4 Press [OK].
To Next Page
Loading...
