Status / Job Cancel
OPERATION GUIDE 7-11
7
Sending the Job Log History
You can send the job log history by e-mail. You can either send it manually as needed or have it sent
automatically whenever a set number of jobs is reached.
Setting the destination
Set the destination to which job log histories are sent.
Use the procedure below to set the destination.
1 Press the System Menu key.
2 Press [Report], [Next] of Sending Job Log History
and then [Change] of Destination.
3 To enter a new e-mail address, press [E-mail
Address Entry].
Press [E-mail Address], enter the destination e-
mail address and then press [OK].
4 To set an address from the address book, press [E-
mail Address Book].
Press [Address Book]. Select the destination from
the address book and press [OK].
NOTE: For information on specifying destinations,
refer to Specifying Destination on page 3-37.
The selected e-mail addresses is displayed.
NOTE: You can view information on the selected
destinations by pressing [Detail].
5 Press [OK].
Automatic Job Log History Transmission
This function automatically sends the job log history to the specified destinations whenever a set number of jobs
has been logged.
Use the procedure below to set automatic job log history transmission.
1 Press the System Menu key.
2 Press [Report], [Next] of Sending Job Log History
and then [Change] of Auto Sending.
To Next Page
Loading...
