Default Setting (System Menu)
8-4 OPERATION GUIDE
Sound
Set options for buzzer sound during the machine operations.
The table below lists the buzzer types and their settings and details.
Use the procedure below to set the sound options.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Sound and
then [Next] of Buzzer.
3 Press [Change] of Volume, Key Confirmation, Job
Finish, Ready, or Warning.
4 Select the buzzer volume level, or other sound
options.
Item Value Description
Volume 0 (Mute), 1 (Minimum)
to 5 (Maximum)
Set the buzzer volume
level.
Key
Confirmation
Off, On Emit a sound when the
control panel and touch
panel keys are pressed.
Job Finish Off, On Emit a sound when a print
job is normally completed.
Ready Off, On Emit a sound when the
warm-up is completed.
Warning Off, On Emit a sound when errors
occur.
To Next Page
Loading...
