Kyocera TASKalfa 250ci - Page 273

Default Setting (System Menu)
OPERATION GUIDE 8-9
8
NOTE: To change to a media type other than Plain, refer to Paper Weight on page 8-9
Use the procedure below to select the paper size and media type for manual paper feed.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings, [Next] of MP Tray Setting and then
[Change] of Paper Size.
3 To detect paper size automatically, press [Auto]
and select Metric or Inch for Paper Size.
To select paper size, press [Standard Sizes 1],
[Standard Sizes 2], [Others] or [Size Entry] for
Paper Size.
If you select [Size Entry], press [+], [–] to enter X
(horizontal) and Y (vertical) dimensions.
Press [# Keys] to enter the paper size using the
numeric keys.
4 Press [OK]. The previous screen reappears.
5 Press [Change] of Media Type to select the media
type and press [OK].
Paper Weight
Select weight for each media type. The options for media type and weight of paper are as follows.
Paper types and weights
Y: Available N: Not available
** Refer to Paper Weight on page 8-9 for selecting Custom 1- 8 from
Media Type.
To print on preprinted or prepunched paper or on letterhead, refer to
Special Paper Action on page 8-14.
Paper Weight Light Normal 1 Normal 2 Normal 3 Heavy 1 Heavy 2 Heavy 3
Extra
Heavy
Weight (g/m
2
),
Media type
64g/m
2
or less
60g/m
2
to
75g/m
2
76g/m
2
to
90g/m
2
91g/m
2
to
105g/m
2
106g/m
2
to
128g/m
2
129g/m
2
to
163g/m
2
164g/m
2
and more
Transpar-
encies
Plain
YYY(defaut) Y** NNNN
Transparency NNNNYYYY(defaut)
Rough YYYY(defaut) YYY* N
Vellum Y(defaut) YYYNNNN
Labels YYYYY(defaut) YYY