Default Setting (System Menu)
OPERATION GUIDE 8-63
8
4 As shown in the illustration, place the printed side
down on the platen with the three black boxes
aligned to the top.
5 Press [Execute]. The color pattern is read and
adjustment begins.
6 The second color pattern is output.
Check that the number "2" (to "3") is printed at the
bottom of the color pattern and repeat steps 4 to 6
twice to read color patterns 2 and 3 in sequence.
7 Press [OK] in the adjustment end confirmation
screen.
Detailed Adjustment
A total of 5 color pattern pages (No. 1 to 5) are printed during detailed adjustment. As with normal adjustment
(page 8-62), the printed color patterns are read sequentially during detailed adjustment.
Use the procedure below to carry out detailed adjustment.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance], [ ] and
then [Next] of Gray Adjustment.
3 Press [Detail].
4 Press [Execute]. A color pattern is printed.
Check that the number "1" is printed at the bottom
of the color pattern.
5 As shown in the illustration, place the printed side
down on the platen with the three black boxes
aligned to the top.
6 Press [Execute]. The color pattern is read and
adjustment begins.
7 The second color pattern is printed.
Check that the number "2" (to "5") is printed at the
bottom of the color pattern and repeat steps 5 to 7
four times to read color patterns 2, 3, 4 and 5 in
sequence.
8 Press [OK] in the adjustment end confirmation
screen.
To Next Page
Loading...
