Kyocera TASKalfa 420i - Page 239

Default Setting (System Menu)
OPERATION GUIDE 8-7
8
Use the procedure below to select the paper size and media type for manual paper feed.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original / Paper Settings, [Next] of MP Tray Setting and then [Change]
of Paper Size.
3 To detect paper size automatically, press [Auto] and select Metric or Inch for Paper Size.
To select paper size, press [Standard Sizes 1], [Standard Sizes 2], [Others] or [Size Entry] for Paper Size.
If you select [Size Entry], press [+], [–] to enter X (horizontal) and Y (vertical) dimensions.
Press [# Keys] to enter the paper size using the numeric keys.
4 Press [OK]. The previous screen reappears.
5 Press [Change] of Media Type to select the media type and press [OK].
Paper Weight
Select weight for each media type. The options for media type and weight of paper are as follows.
Paper types and weights
Y: Available N: Not available
Paper Weight Light Normal 1 Normal 2 Normal 3 Heavy 1 Heavy 2 Heavy 3
Extra
Heavy
Weight (g/m
2
),
Media type
64g/m
2
or less
60g/m
2
to
75g/m
2
76g/m
2
to
90g/m
2
91g/m
2
to
105g/m
2
106g/m
2
to
135g/m
2
136g/m
2
to
163g/m
2
164g/m
2
and more
Transpar-
encies
Plain
YY
Y
(default) Y
NNNN
Transparency
NNNNNNN
Y
(default)
Rough
YYY
Y
(default)
YN
N
*
N
Vellum Y (default)
YYYNNNN
Labels
NNNN
Y
(default)
YYN
Recycled
YY
Y
(default)
YNNNN
Preprinted
YY
Y
(default)
YNNNN
Bond
YYY
Y
(default)
YNN*N
Cardstock
NNNNY
Y
(default)
YN
Color
YY
Y
(default)
YNNN
N
Prepunched
YY
Y
(default)
YNNNN
Letterhead
YY
Y
(default)
YYNNN
Thick
NNNYY
Y
(default) Y*
N*