Kyocera TASKalfa 420i - Page 240

Default Setting (System Menu)
8-8 OPERATION GUIDE
For Custom 1-8, settings for duplex printing and media type name can be changed.
Use the procedure below to set the paper weight.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original / Paper Settings and then [Next] of Media Type Setting.
3 Press [Next] for the media type whose weight you want to change.
4 Press [Change] of Paper Weight.
5 Select the weight and press [OK].
6 Press [Close].
The previous screen reappears.
7 To change the duplex printing settings for Custom 1 (-8), press [Next] of Custom 1(-8) and then [Change]
of Duplex. Select [Prohibit] or [Permit] and press [OK].
The previous screen reappears.
8 Press [Close].
9 To change the name for Custom 1(-8), press [Next] of Custom 1(-8) and then [Change] of Name. Enter the
name and press [OK].
NOTE: Refer to the Character Entry Method on Appendix-10<blue> for details on entering characters.
Envelope
NNNNY
Y
(default)
YN
High Quality
YY
Y
(default)
YYNNN
Custom 1-8
YY
Y
(default)
Y
Y
* Y* Y* Y*
* When
Heavy 1, Heavy 2, Heavy 3, or Extra Heavy is selected, the media type cannot be selected for the
cassettes.
Item Description
Duplex Prohibit Duplex printing not allowed.
Permit Duplex printing allowed.
Name Change names for Custom 1-8. Names should be not more
than 15 characters. Selecting media type at multi purpose
tray, the name after change will be displayed.
Paper Weight Light Normal 1 Normal 2 Normal 3 Heavy 1 Heavy 2 Heavy 3
Extra
Heavy