Management
OPERATION GUIDE 11-21
11
Default Counter Limit
When you add a new account, you can change the default restrictions on the number of sheets used.
You can set any number from 1 to 9,999,999 in 1-sheet increments.
The items that can be set differ depending on whether [Split] or [Total] is selected for Managing the Copier/
Printer Counts on page 11-18.
Available Settings
[Split] selected for Copier/Printer Count
[Total] selected for Copier/Printer Count
Use the procedure below to specify the counter limits.
1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If user login administration is disabled, the user
authentication screen appears. Enter a login user
name and password, and press [Login]. For this,
you need to login with administrator privileges.
Refer to Adding a User on page 11-5 for the default
login user name and password.
Item Detail
Copy Restriction (Total) Sets the default restriction on the number of sheets used for
copying.
Print Restriction (Total) Sets the default restriction on the total number of sheets used
for printing.
Scan Restriction (Others) Sets the default restriction on the number of sheets used for
scanning (excludes copying).
FAX TX Restriction Sets the default restriction on the number of sheets used for
sending faxes. This is displayed when the optional fax kit is
installed.
Item Detail
Print Restriction (Total) Sets the default restriction on the total number of sheets used
for copying and printing.
Scan Restriction (Others) Sets the default restriction on the number of sheets used for
scanning (excludes copying).
FAX TX Restriction Sets the default restriction on the number of sheets used for
sending faxes. This is displayed when the optional fax kit is
installed.
To Next Page
Loading...
