Kyocera TASKalfa 420i - U157 Checking the developing drive time; U158 Checking the developing count; U161 Setting the fuser control temperature

Basic Operation
OPERATION GUIDE 3-17
3
Staple
Use this feature to staple your finished copies.
NOTE: Stapling requires the optional built-in finisher, document finisher or 3,000 sheet document finisher.
Note also that saddle stitching (center stapling) requires the folding unit.
The following stapling options and orientations are available.
Original Orientation:
Top Edge (Back Edge)
Original Orientation:
Top Edge (Back Edge)
Original Orientation:
Left Top Edge (Left top
corner)
Original Orientation:
Left Top Edge (Left top
corner)
3,000 Sheet Document
Finisher
Cassette Paper Load
Direction
3,000 Sheet Document
Finisher
Cassette Paper Load
Direction
Document Finisher
Cassette Paper Load
Direction
Document Finisher
Cassette Paper Load
Direction