18
4.0 DESCRIPTION OF CONTROLS
4.3 DISPLAYS
CLIP:
These light at 16dBu clipping and provide a visual indication of high signal
levels.
Please note that with the level meters set to VU mode the CLIP indicators
will light before the +12dB led on the meters for fast transient signals.
LEVEL METERS:
A visual indication of signal levels entering or leaving the digEQ. Select Input or
Output in the UTILITY page, back-lit annunciators show selection.
The 0dB led lights when +4dBu is present at the Input or Output of the
DPF3103.
GATE:
These LED's provide a visual indication that the noise gate is closed i.e. signal
muted.
PROGRAM:
Displays the Program memory number for STORE, COMPARE and RECALL
modes.
MAIN DISPLAY:
Back-lit 240 x 60 LCD display.
CONTRAST:
Adjusts the viewing angle of the Main Display. Also as the contrast of an LCD
typically changes with ambient temperature it can be corrected by using the
CONTRAST control.
BRIGHTNESS:
This control adjusts the brightness of the LCD backlight.
To Next Page
Loading...