Labconco Protector Echo 180 Series User Manual

Chapter 3: Getting Started
Product Service 1-800-522-7658
24
Original instructions
Step 12 – Install fan wires.
Connect the fans with fan wires. Start with the fan farthest to the left. Put the wire
into the right slot on the fan circuit board to the left side of the fan box to the
right. The v-notched groove on the connector is always to the right.
Fan
wiring
inlet
V-notch
groove to
right on fan
connectors
Fan
wiring
outlet
Air
Sampling
Tubing

Labconco Protector Echo 180 Series Specifications

General

Brand	Labconco
Model	Protector Echo 180 Series
Category	Laboratory Equipment
Language	English