18
M
N
O
Check manual release operation, when the handle is in locked
position, the electric lock must operate normally.
When the handle is in released position, the electric lock must
remain open and release the leaves.
Cut the excess cable from the release anchor.
NOTE:
In the case of a FAIL SECURE electric lock, by releasing the release, the electric lock sets to closed.
In the case of a bistable electric lock, by releasing the release, it sets to open.
In the case that it is necessary to manually close the door with a bistable electric lock, it will be su󰀩cient to raise the core of the secondary
solenoid with a screwdriver.
To Next Page
Loading...
Need help?
General
