LAIKA Kosmo Compact 5 - In Case of Malfunction

USER GUIDE
34
  ENTRANCE STEP
6.1.1 In case of malfunction
Ecovip and Kreos series
In case of malfunction, with the step blocked in open
position, proceed as follows to manually move the
step to its closing position, then contact one of Laika
authorised workshops.
1) Insert a screwdriver or other suitable tool inside of
the hole (a) located under the step and push until
the step unlocks.
2) Manually push the step to its closure position.
Kosmo Compact 5, Compact 9
In case of malfunction, with the step blocked in open
position, proceed as follows to manually move the
step to its closing position, then contact one of Laika
authorised workshops.
1) On the left side of the step, remove the R-clip (a)
and unhook the arm (b) from the rotating shaft (c),
use a screwdriver or other suitable tool to help
lever.
2) Manually push the step to its closure position.
a
a
b
c