49
USER GUIDE
CONTROL PANEL
9.3 Kosmo Compact 5,
Compact9
1) Button to control auxiliary battery voltage (B2).
2) Button to control engine battery voltage (B1).
3) Button to control fresh water and waste water
tank level.
4) On/off main switch. The flashing LED indicates
that the auxiliary battery is run down and all the
appliances will soon be disconnected.
5) Button for pump on and off.
6) Awning light control button, switches automati-
cally off when you start up the engine.
7) The flashing of this LED indicates that the
auxiliary battery (B2) has run down.
8) The flashing of this LED indicates that the engine
battery (B1) has run down.
9) The flashing of this LED indicates that the fresh
water tank is empty.
10) The flashing of this LED indicates that the waste
water tank is full.
11) Indicates 230 V power source connection.
12) Battery voltage and tank level display.
13) Indicates the auxiliary battery charging by means
of the vehicle alternator.
Refer to the producer’s handbook for further
information on the control panel.
NOTE
At startup the control panel checks the working
of all LEDs.
NOTE
Refer to the producer’s handbook for further
information on the control panel.
NOTE