LAIKA Kosmo Compact 5 - Rear Bed; Tilting Bed Cab Kosmo A-Class with Manual Handling

83
USER GUIDE
  INTERNAL COMPONENTS
Manual handling of the bed
In case of malfunction or power failure, the bed
can be moved manually using the special handle (a)
supplied as standard equipment.
The handle must be inserted in to hole (b) located in
the cabinet under the bed surface, on the left side.
17.6.3 Rear bed
The switch (a) for the control of ascent and descent is
located under the bed, inside the garage.
The electric motor is protected by a fuse (see chapter
10 - Control Unit - Fuses).
17.7 Tilting bed cab Kosmo
A-class with manual
handling
The bed is equipped with two safety latches (a) for
locking in the raised position.
a
b
Some parts of the bed may hit the table when
the bed is lowered. Furthermore, the table may
prevent proper positioning of the ladder for
access to the bed. Before lowering the bed,
arrange the table top so that it does not interfere
with any part of the bed.
WARNING
Before driving off, make sure that the bed is
locked in the raised position.
WARNING
a
aa