CHAPTER 2
INSTALLATION
2.0 GENERAL
This chapter provides general installation instructions for the Model 211
Temperature Monitor. To ensure the best possible performance and to
maintain operator safety, please read the entire chapter before installing and
operating the instrument. Refer to Chapter 3 for operating instructions.
Refer to Chapter 4 for computer interface installation and operation.
2.1 INSPECTION AND UNPACKING
Inspect shipping containers for external damage before opening. Photograph
any container that has significant damage before opening it. If there is
visible damage to the contents of the container, contact the shipping
company and Lake Shore immediately, preferably within 5 days of receipt
of goods. Keep all damaged shipping materials and contents until instructed
to either return or discard them.
Open the shipping container and keep the container and shipping materials
until all contents have been accounted for. Check off each item on the
packing list as it is unpacked. Instruments may be shipped as several parts.
The items included with the Model 211 are listed as follows.
Items Included with Model 211 Temperature Monitor:
Model 211 Instrument
Model 211 User’s Manual
Input/Output Mating Connector and Shell
Panel Mount Hardware Installed at Factory
Universal Input Power Supply (interchangeable plug style)
Cable Clamp
Rubber Feet
Contact Lake Shore immediately if there is a shortage of parts or
accessories. Lake Shore is not responsible for any missing items if not
notified within 60 days of shipment.
Inspect all items for both visible and hidden damage that occurred during
shipment. If damage is found, contact Lake Shore immediately for
instructions on how to file a proper insurance claim. Lake Shore products
are insured against damage during shipment but a timely claim must be
filed before Lake Shore will take further action. Procedures vary slightly
with shipping companies. Keep all shipping materials and damaged
contents until instructed to either return or discard them.