Lakeshore 211 - RELAY Relay Control Parameter Command; RELAY? Relay Control Parameter Query; SRDG? Sensor Units Input Reading Query

Lake Shore Model 211 User’s Manual
Remote Operation 4-
21
RELAY Relay Control Parameter Command
Input: RELAY <relay number>, <mode>[term]
Format: n,n
<relay number> Specifies which relay to configure: 1 =
low alarm relay, 2 = high alarm relay.
<mode> Specifies relay mode. 0 = Off, 1 = On, 2 =
Alarms.
Example: RELAY 1,2[term] – Low alarm relay activates when low
alarm activates.
RELAY? Relay Control Parameter Query
Input: RELAY? <relay number>[term]
Format: n
<relay number> Specifies which relay to query: 1 = low
alarm relay, 2 = high alarm relay.
Returned: n (Refer to command for description)
SRDG? Sensor Units Input Reading Query
Input: SRDG?[term]
Returned: <sensor units value>[term]
Format: ±nnnnnn
Remarks: Also see the RDGST? command.