4 Technical Description
25
4.6.5 Menu function
[ view ] opens the Parameter menu. The functions of the menu bar are as follows:
[ exit ] returns to the [ par ] menu function.
[ s/l ] changes the display format:
Short: Only the number of the parameter and the current value are displayed.
Medium: A brief description is displayed in addition to the parameter number and the
current value.
Long: In addition to the Medium display, a status bar for the parameters is shown.
[ group - ] pages back by one parameter group.
[ group+ ] pages forwards by one parameter group.
All the available parameter groups are set out in the appendix.
The cursor keys (left, right) correspond to the key function: [ group- ] or [ group+ ]
If not all parameters of a group are displayed in the viewing window, this situation is
indicated by flashing arrows in the right-hand margin. You can move and view the
parameters using the cursor keys (up, down).
Here is an example of the status bar shown with the Long display:
• *kw*_30_[12 ,42 ]_____
The asterisks ‘ * ‘ or ‘__’ are fill characters.
• “k” indicates Customer access level (o = Operation, c = Customer, s = Service, f
= Factory)
• “w” shows the type of parameter (write = can be edited, read = read only)
• “30” is the ‘default’ value (basic value in EPROM)
• “[ 12 ; 42 ]” is the possible range within which the parameters can be changed
With some parameters, no ‘default’ value or interval is shown!
To Next Page
Loading...
