Lanier LD225 - Specifications

Specifications
139
6
Specifications
*1
The optional IEEE 1394 interface board supports only TCP/IP.
*2
Use the SmartDeviceMonitor for Client port.
*3
To use IPP under Windows XP, Windows Server 2003, use the Standard IPP port. Note, in Smart-
DeviceMonitor for Client however, this port does not support digest access authentication.
*4
This can be used when the PostScript 3 module is installed.
Interface
100BASE-TX, 10BASE-T, IEEE 1394 (IP over 1394)
*1
, IEEE 802.11b
Frame type EthernetII, IEEE 802.2, IEEE 802.3, SNAP
Protocol • Printer (LAN-Fax)
TCP/IP
LPR
RSH
RCP
DIPRINT
FTP
IPP
*2 *3
IPX/SPX (NetWare)
AppleTalk
*4
•Internet Fax
TCP/IP
SMTP
POP
IMAP
• Network Scanner
TCP/IP
RSH
FTP
SMTP
POP
• Document Server
TCP/IP
FTP
HTTP
• Management Function
TCP/IP
RSH
RCP
FTP
SNMP
HTTP
TELNET (mshell)
NBT
DHCP
DNS
LDAP
SNMP v1/v2 MIB-II, PrinterMIB, HostResourceMIB, RicohPrivateMIB
SNMP v3 MIB-II, PrinterMIB, HostResourceMIB, RicohPrivateMIB, SNMP-
FRAMEWORK-MIB, SNMP-TARGET-MIB, SNMP-NOTIFICATION-
MIB, SNMP-USER-BASED-SM-MIB, SNMP-VIEW-BASED-ACM-MIB