Lanier LD225 - Printing;Deleting Received and Stored Documents (Print;Delete Stored RX File)

Connecting and Setting Up
28
2
Network Configuration
Any change you make with User
Tools remains in effect even if the
main power switch or operation
switch is turned off, or the {Energy
Saver} or {Clear Modes} key is pressed.
Configuring the network using the control panel
Note
❒ Operations for System Settings are
different from normal operations.
After using User Tools, press the
{User Tools/Counter/Inquiry} key to
exit.
❒ When [User Authentication Manage-
ment] is set, operations are not pos-
sible with the machine unless a
valid user name and password is
entered. For details about user au-
thentication, consult administra-
tor.
A Press the {User Tools/Counter/Inquiry}
key.
Note
❒ The machine will be offline dur-
ing setting.
B Press [System Settings].
C Press [Interface Settings] or [File Trans-
fer].
D Select the required menu, and then
press the desired key.
E Change settings by following the
instructions on the display panel,
and then press [OK].
Note
❒ To cancel changes made to set-
tings and return to theSystem
Settings menu, press [Cancel].
F Press [Exit].
G Press the {User Tools/Counter/Inquiry}
key.
Note
❒ You can also exit by pressing
[Exit] on the User Tools main
menu.