Monitoring and Configuring the Printer
78
4
D On the [Tools] menu, click [NIB Set-
up Tool].
A Web browser opens and the dia-
log box for entering the password
for the Web Image Monitor admin-
istrator appears.
NIB Setup Tool starts when the
network interface board is default.
Follow the instructions on the
screen.
E Enter the user name and pass-
word, and then click [OK].
For details about the user name
and password, consult your net-
work administrator.
Top Page of Web Image Monitor
appears.
F Click [Configuration].
G Click [Device Settings].
H Click [Program/Change Administrator].
I Click [Change].
J On the [New Password], enter a pass-
word.
Enter the same password in [Con-
firm Password] .
K Click [OK].
L Click [Apply].
M Quit Web Image Monitor.
N Quit SmartDeviceMonitor for Ad-
min.
Checking the Machine Status
Follow the procedure below to check
machine status.
A Start SmartDeviceMonitor for Ad-
min.
B On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP
(SNMPv3)].
The status of machines is indicated
by icons in the list.
Note
❒ For details about status icons,
see SmartDeviceMonitor for
Admin Help.
❒ If you are using TCP/IP SNMP
V3, enter the user authentication.
C To obtain status details, click the
machine in the list, and then click
[Open] on the [Device] menu.
The machine status appears in the
dialog box.
D Quit SmartDeviceMonitor for Ad-
min.
Note
❒ For details about items in the di-
alog box, see SmartDeviceMon-
itor for Admin Help.
Changing Names and Comments
Follow the procedure below to
change the names and comments of
the machine.
A Start SmartDeviceMonitor for Ad-
min.
B On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP(SNMPv3)].
A list of machines using the selected
protocol appears.
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
❒ If you are using TCP/IP SNMP
V3, enter the user authentication.
To Next Page
Loading...
