Using SmartDeviceMonitor for Client
81
4
Using SmartDeviceMonitor for Client
To view the status of machines using
SmartDeviceMonitor for Client, con-
figure SmartDeviceMonitor for Client
beforehand.
Monitoring Printers
Follow the procedure below to moni-
tor the machine using SmartDevice-
Monitor for Client.
A Start SmartDeviceMonitor for Cli-
ent.
The SmartDeviceMonitor for Cli-
ent icon appears in the task tray.
B Right-click the SmartDeviceMon-
itor for Client icon, and check that
the machine appears on the pop-
up menu.
C Click [Options...] on the pop-up
menu if the machine does not ap-
pear on the pop-up menu.
The [SmartDeviceMonitor for Client -
Options] dialog box appears.
D Click the machine you want to
monitor, and then select the [To Be
Monitored] check box in the [Moni-
toring Information Settings] area.
Note
❒ To display the machine status in
the task tray using the SmartDe-
viceMonitor for Client icon, se-
lect the [Displayed on Task Bar]
check box.
❒ For details about status icons,
see SmartDeviceMonitor for
Client Help.
E Click [OK].
The dialog box closes and the con-
figured machine is monitored.
Checking the Machine Status
Follow the procedure below to check
machine status using SmartDevice-
Monitor for Client.
A Start SmartDeviceMonitor for Cli-
ent.
B For status details, right-click the
SmartDeviceMonitor for Client
icon, and then click the machine.
The machine status appears in the
dialog box.
Note
❒ For details about items in the di-
alog box, see SmartDeviceMon-
itor for Client Help.
When Using IPP with
SmartDeviceMonitor for Client
When using IPP with SmartDevice-
Monitor for Client, note the following:
• The network printer can only re-
ceive one print job from SmartDe-
viceMonitor for Client at a time.
While the network printer is print-
ing, another user cannot access it
until the job is finished. In this case,
SmartDeviceMonitor for Client
tries to access the network printer
until the retry interval expires.
To Next Page
Loading...
