Monitoring and Configuring the Printer
80
4
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
❒ If you are using TCP/IP SNMP
V3, enter the user authentication.
C Select a machine.
D On the [Tools] menu, click [Spool
Printing Job List(Printer)].
A Web browser opens and the dia-
log box for entering the user name
and password for the Web Image
Monitor administrator appears.
For details about the user name
and password, consult your net-
work administrator.
E Check the Spool Printing Job List
that appears in the Web Image
Monitor.
To delete the Spool Printing Job,
select the document you want to
delete and then click [Delete].
Note
❒ To display Spool Printing Job
List, spool must be set to [Ena-
ble] on Web Image Monitor in
advance.
Reference
For details, see Help in Spool
Printing Job List area.
Managing Address Information
A Start SmartDeviceMonitor for Ad-
min.
B On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP
(SNMPv3)]. A list of machines us-
ing the selected protocol appears.
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
❒ If you are using TCP/IP SNMP
V3, enter the user authentication.
C Select a machine.
D On the [Tools] menu, click [Ad-
dress Management Tool].
The dialog box for entering the
user name and password appears.
E Enter the user name and pass-
word, and then click [OK].
Address Management Tool starts.
For details about the user name
and password, consult your net-
work administrator.
Reference
For details, see Address Man-
agement Tool Help.
To Next Page
Loading...
