Monitoring and Configuring the Printer
74
4
D On the [Tools] menu, click [NIB Set-
up Tool].
A Web browser opens and the dia-
log box for entering the user name
and password for the Web Image
Monitor administrator appears.
For details about the user name
and password, consult your net-
work administrator.
NIB Setup Tool starts when the
network interface board is default.
Follow the instructions on the
screen.
E Enter required setting items.
Configure settings using Web Im-
age Monitor. For details, see p.67
“Using Web Image Monitor”.
F Quit Web Image Monitor.
G Quit SmartDeviceMonitor for Ad-
min.
Locking the Menus on the
Machine's Control Panel
Follow the procedure below to lock
the menus on the machine's control
panel.
A Start SmartDeviceMonitor for
Admin.
B
On the
[
Group:
]
menu, point to
[
Search Device
]
, and then click
[
TCP/IP
]
,
[
IPX/SPX
]
or
[
TCP/IP(SNMPv3)
]
.
A list of machines using the select-
ed protocol appears.
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
❒ If you are using TCP/IP SNMP
V3, enter the user authentication.
C Select a machine.
D On the [Tools] menu, point to [De-
vice Settings], and then click [Lock
Operation Panel Menu].
A Web browser opens and the dia-
log box for entering the password
for the Web Image Monitor admin-
istrator appears.
E Enter the user name and pass-
word, and then click [OK].
For details about the user name
and password, consult your net-
work administrator.
The [System] page of Web Image
Monitor appears.
F Select [Level 1] or [Level 2] in the
[Protect Printer Operation Panel] list.
G Click [Apply].
H Quit Web Image Monitor.
Reference
For details about setting items,
see Help in the [General Settings]
on [Configuration] page.
Changing the Paper Type
Follow the procedure below to
change the paper type.
A Start SmartDeviceMonitor for Ad-
min.
B
On the
[
Group:
]
menu, point to
[
Search Device
]
, and then click
[
TCP/IP
]
,
[
IPX/SPX
]
or
[
TCP/IP(SNMPv3)
]
.
A list of machines using the select-
ed protocol appears.
Note
❒ Select the protocol of the ma-
chine whose configuration you
want to change.
❒ If you are using TCP/IP SNMP
V3, enter the user authentication.
To Next Page
Loading...
