Lanier LD225 - File Transfer

Setting Up the Machine on a Network
39
2
D Press [Print List].
E Press the {Start} key.
The configuration page is printed.
F Press [Exit].
G Press the {User Tools/Counter/Inquiry}
key.
Note
❒ You can also exit by pressing
[Exit] on the User Tools main
menu.
File Transfer
❖ Delivery Option
Enables or disables sending stored
or scanned documents via the
ScanRouter V2 Professional deliv-
ery server.
•On
• Main Delivery Server IP Ad-
dress
• Sub Delivery Server IP Ad-
dress
•Off
Note
❒ Default: Off
❒ Set this option when specifying
whether or not to use ScanRouter
V2 Professional. If you do, you
will have to re-register I/O devic-
es in ScanRouter V2 Professional.
❖ Capture Server IP Address
Specify the capture server IP ad-
dress.
Note
❒ This setting appears when the
media link board is installed,
and that the capture function is
being used by the ScanRouter
V2 Proffessional.
❖ Fax RX File Transmission
• Setting per Line
Specifies whether or not re-
ceived fax documents are sent
to ScanRouter V2 Professional
for each fax line.
• Line 1:Deliver to Server/Do
not Deliver
• Line 2:Deliver to Server/Do
not Deliver
• E-mail:Deliver to Server/Do
not Deliver
Note
❒ Default: Do not Deliver
• Print at Delivery
Specifies whether or not re-
ceived fax documents sent to
ScanRouter V2 Professional
should also be printed at the
same time.
•Print
•Do not Print
Note
❒ Default: Do not Print
• File to Deliver
Specifies whether all received
fax documents or only received
fax documents that include de-
livery codes (documents with an
ID and SUB/SEP code) are sent
to ScanRouter V2 Professional.
• File with Dlvry Code
• All Files
Note
❒ Default: All Files
• Dlvry Failure File
• Print File
• Delete File
If a received fax document cannot
be sent to ScanRouter V2 Profes-
sional, it is stored in memory. To
print a stored file, select [Print
File]; to delete, select [Delete File].