Lanier LD225 - Page 82

Monitoring and Configuring the Printer
76
4
C Click [Exit] on the [File] menu to
quit User Management Tool.
Exporting the information about the
number of pages printed
Follow the procedure below to export
the information of the number of pag-
es printed under each user code as a
.csv file.
A Start SmartDeviceMonitor for
Admin User Information Man-
agement Tool.
B Click the [User Page Count] tab of
User Management Tool.
C On the [File] menu, click [Export
User Statistics List].
D Specify the save location and file
name, and then click [Save].
E Click [Exit] on the [File] menu to
quit User Management Tool.
Resetting the number of pages printed to 0.
Follow the procedure below to reset
the number of pages printed under
each user code to 0.
A Start SmartDeviceMonitor for
Admin User Information Man-
agement Tool.
B Click the [User Page Count] tab of
User Management Tool.
C Click the user whose information
you want to reset.
D On the [Edit] menu, click [Reset
User Counters].
E Select the check box of the items
you want to reset, and then click
[OK].
A confirmation message appears.
F Click [OK].
The number of pages printed is re-
set to 0.
G On the [Edit] menu, click [Apply
Settings].
Changes are applied to informa-
tion on the [User Page Count] tab.
H Click [Exit] on the [File] menu to
quit User Management Tool.
Restricting Functions
Follow the procedure below to re-
strict use of individual functions.
A Start SmartDeviceMonitor for
Admin User Information Man-
agement Tool.
B On the [Edit] menu of User Man-
agement Tool, click [Restrict Ac-
cess To Device].
C Select the check box of the func-
tions you want to restrict.
D Click [OK].
A confirmation message appears.
E Click [Yes].
The settings are applied.
Setting Applicable Functions to New Users
Follow the procedure below to add
new users and set functions applica-
ble to them.
A Start SmartDeviceMonitor for
Admin User Information Man-
agement Tool.
B Click the [Access Control List] tab of
User Management Tool.
C On the [Edit] menu, click [Add New
User].