Lantronix xPrintServer

Lantronix® xPrintServer® User Guide 35
4: Configuration
This chapter describes how to configure your Lantronix xPrintServer device using the
xPrintServer device’s Admin interface.
Viewing Configured Printers
Utilize these instructions to view provisioned network-connected printers. These include printers
installed since the xPrintServer last started up or any newly added printers on other networks
(see Adding a Printer IP Address.)
1. Login to the xPrintServer device’s Admin interface (see Logging In.)
2. Click the Printers tab to access the Printers > List page. The Description, Location,
Make/Model, the last known Status of all currently configured printers, and Cloud Enabled
status will be listed on this page.
3. Utilize Navigation as necessary in situations where there are multiple pages of printers.
4. Utilize Search as necessary to find a particular printer.
5. Click on any printer in the list to retrieve additional information on that printer. In Figure 4-1
below, the second printer in the list was clicked and the associated printer details displayed in
a grey field at the bottom of the list of printers.
Figure 4-1 Printer Details and Pop-Up Command Menu
6. Click the button to the right of a specific printer to access a pop-up command menu of
options available for that printer (see Figure 4-1.) Each of these options is explained in
greater detail under Admin Printer Configuration Options.
Location
Print Status
Cloud Print
Connection Status
Description
Printer Driver
URL