Lantronix xPrintServer User Manual

4: Configuration
Lantronix® xPrintServer® User Guide 39
5. Expand the SNMP field to see configuration information about the discovered printer(s). An
example of what you may see in the SNMP field:
Figure 4-4 Expanding Detected Printers Information
6. Expand the Detected Printers field and further expand additional available subcategories
(indicated with a
icon to the left) to see a list of discovered printers and the status of the
provisioning results.
Note: If you expand the Printer Auto Discovery Report, you may need to use the left-right and
up-down scroll bar to see the entire contents of your report.
Deleting All Configured Printers
The auto discovery utility of the xPrintServer device is enabled by default so that whenever you
turn on your xPrintServer device, auto discovery will automatically run one time.
1. Login to the xPrintServer device’s Admin interface (see Logging In.)
2. Click the Printer tab to access the Printers > List page (see Figure 4-1.)
3. Click the Discovery link to the left of the page to reach the Printer Discovery page.
4. Click the Remove all printers button to remove all configured printers, as desired.
5. Click Yes in the confirmation popup that appears.
6. Log-off (see Logging Off) and close your browser. All printers are deleted.
7. Click the Home tab to access the System Status page (see Figure 3-3 IP System Status
Information on the Home Page.)
8. Click From Google’s Website to access the Google Cloud Print management page (see
Supplementary Google Cloud Print Administrative Features.)
9. Verify all printers have been de-registered by going into the Google Cloud Print management
page and deleting any leftover printers from the previous xPrintServer device registration.

Lantronix xPrintServer Specifications

General

Brand	Lantronix
Model	xPrintServer
Category	Print Server
Language	English