Lantronix xPrintServer User Manual

Lantronix® xPrintServer® User Guide 67
To change a non-Admin user password as the Admin:
1. Login to the xPrintServer user interface as Admin user (see Logging In.)
2. Click the Users tab to access the Users page. All users are listed here.
3. Utilize Search as necessary to find a particular user.
4. Click Password button to the right of the User ID to be changed.
5. Enter the new password into both fields:
 Password
 Re-enter Password
6. Click Change Password.
7. Click OK in the confirmation popup that appears. User password is changed.
Note: If the Admin user password is changed, you will be asked to login again if you attempt to
navigate to a different user interface page.
Figure 4-28 Changing Other User Passwords (Admin User Only)
Adding a New User
The Admin user can use these steps to create new users.
1. Login to the xPrintServer user interface as Admin user (see Logging In.)
2. Click the Users tab to access the Users page. All users are listed here.
3. Click Add User…
Note: The Full Name of a new user is case sensitive and may include up to 32 alpha and/or
numeric characters.
4. Enter the following fields for the new user:
 Username
 Password
 Re-enter Password
 Full Name
 GCP Account
5. Click Add User (or Cancel if you want to cancel this action.) The new user will immediately
display on the Users page.
Note: When establishing a new user, please note
that the iOS device browser capitalizes the first
character of the User ID. Make sure the User ID is
correct prior to submitting your request to add user.
Note: Passwords are case-sensitive and
may include up to 32 characters. All
printable characters maybe used with the
exception of single and double quotation
marks such as: ‘ or “.

Lantronix xPrintServer Specifications

General

Brand	Lantronix
Model	xPrintServer
Category	Print Server
Language	English