Do you have a question about the Larson Davis HVM200 and is the answer not in the manual?
Category | Measuring Instruments |
---|---|
Time Weighting | Fast, Slow, Impulse |
Data Logging | Yes |
Display | Color LCD |
Measurement Range (Sound Level) | 140 dB |
Frequency Range (Vibration) | 0.5 Hz |
Frequency Range (Sound) | 20 kHz |
Dynamic Range | 110 dB |
Weighting Networks | A, C, Z |
Microphone Type | 1/2" |
Operating Temperature Range | -10 °C to +50 °C |
Connectivity | USB |
Data Storage | SD card |
Describes the HVM200, its key features, and available options for vibration measurement.
Lists items included in the HVM200 package, optional kits, and accessories.
Instructions for charging, powering on, and using the power button of the HVM200.
Steps for establishing a WiFi connection between the HVM200 and a mobile device.
How to connect the HVM200 to the G4 LD Utility software for data management and setup.
Procedures for physically connecting the accelerometer sensor to the HVM200 meter.
Guides users through setting up measurements and performing calibration checks.
Steps for conducting, starting, stopping, and annotating vibration measurements.
How to view measurement data and download raw or HVM files.
How to set or synchronize the device's internal clock via G4 LD Utility or mobile app.
Steps to manage the WiFi signal and upgrade the device's firmware and options.
Details device properties, measurement modes, dimensions, weight, and connections.
Information on device operation, LED indicators, power, and electrical inputs.
Defines measurement ranges, frequency weighting curves, and tables.
Details OBA specifications, compliance, and industry standards met by the HVM200.
Mechanical details, dimensions, and mass of various HVM200 adapters.
Frequency response test results for adapters used with SEN041 accelerometer.
Definitions for RMS Acceleration, Energy Equivalent RMS Acceleration, and Vibration Dose Value.
Regulatory compliance information from FCC and Industry Canada for the HVM200.