Larson Davis HVM200 User Manual

HVM200 Reference Manual Overview 2-1
Module 2 Getting Started
2.1 Overview ...............................................................................................................2-1
2.2 Powering the HVM200 ..........................................................................................2-1
2.3 Power Button Operation ........................................................................................2-3
2.4 Downloading the HVM200 Control App ................................................................2-3
2.5 Connecting the HVM200 to a Mobile Device ........................................................2-4
2.5.1 Mobile Device Connection Options ..........................................................2-4
2.5.2 Connecting to a Mobile Device via Access Point .....................................2-4
2.5.3 Connecting HVM200 to WiFi Network ......................................................2-5
2.6 Connecting HVM200 to G4 LD Utility ....................................................................2-7
2.6.1 G4 LD Utility Connection Options ............................................................2-7
2.6.2 Connecting the HVM200 meter to G4 LD Utility via USB .........................2-8
2.6.3 Connecting the HVM200 meter to G4 LD Utility via IP Address ..............2-8
2.7 Connecting the Accelerometer ..............................................................................2-9
2.1 Overview
This module provides instructions for setting up and configuring
HVM200 meters for use with the HVM200 Control app and G4 LD Util-
ity.
2.2 Powering the HVM200
Before using your HVM200, charge the battery completely by following
these steps:
Step 1 Slide and remove the back battery cover from the HVM200
meter.
FIGURE 2-1 Remove Battery Cover

Larson Davis HVM200 Specifications

General

Brand	Larson Davis
Model	HVM200
Category	Measuring Instruments
Language	English