HVM200 Reference Manual Physical Characteristics A-3
A.1.6 Stabilization Time
• 60 seconds
• Measurements with integration settings require up to one minute additional stabilization time before
initiating (the Power LED may display a solid green color during this additional stabilization time).
A.1.7 Data Storage
• Removable micro SD memory card up to 32 GB.
• 2 GB file size limit. Files are truncated at 2 GB. No limit to number of files or setups.
• Data and settings are stored in non-volatile memory
• Swapping limitation: Device must be off while replacing Micro SD card or battery.
A.1.8 Transducer Electronic Data Sheets (TEDS) Support
• Chips supported by HVM200: DS2430 and DS2431
• Versions supported: 0.9 (only DS2430 chip) and 1.0
• Templates supported: 0 (version 0.9), 25 (version 1.0)
A.2 Physical Characteristics
A.2.1 Dimensions/Weight
• Length: 4.6 inches (11.8 cm)
• Width: 2.6 inches (6.7 cm)
• Depth: 0.7 inches (1.8 cm)
• Weight: 4.6 ounces (130 grams) - including battery
• Ingress Protection Rating: IP42
A.2.2 Communication Interface
• USB 2.0 Hi-Speed
• WiFi 802.11 b/g/n with WPA and WPA2 security
A.2.3 Connections
• Micro-B USB cable (Communication and power)
• 1/4-28 4-pin 3-channel sensor connector
To Next Page
