Lattice Semiconductor MachXO2 User Manual

MachXO2 and MachXO3 Starter Kit Evaluation Board User Guide
Evaluation Board User Guide
© 2014-2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
6 FPGA-EB-02036-1.4
1. Introduction
This user guide describes how to start using the MachXO2 and MachXO3 Starter Kits, an easy-to-use platform for
evaluating and designing with the Mach XO2 and MachXO3 ultra-low-density FPGA. Along with the board and
accessories, this kit includes a pre-loaded demonstration design. You may also reprogram the on-board MachXO2 and
MachXO3 device to review your own custom designs.
The MachXO2 Start Kit currently features the LCMXO2-4000ZE (Flash Based) device in the 256-ball 0.8 mm pitch caBGA
package. The MachXO3 Starter Kit currently features the MachXO3L-6900C (NVCM Based) or the MachXO3LF-6900C
(Flash Based) device in the 256-ball 0.8 mm pitch caBGA package. The kits also include a Serial Flash Memory for
demonstrating external SPI boot-up. The external Flash Memory also supports a dual-boot mode in addition to Golden
boot/fail-safe boot options.
See the Ordering Information section for more information.
Note: Static electricity can severely shorten the lifespan of electronic components. See the Storage Handling section of
this document for handling and storage tips.

Lattice Semiconductor MachXO2 Specifications

General

Brand	Lattice Semiconductor
Model	MachXO2
Category	Controller
Language	English