Lattice Semiconductor MachXO2 User Manual

MachXO2 and MachXO3 Starter Kit Evaluation Board User Guide
Evaluation Board User Guide
© 2014-2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-EB-02036-1.4 39
Revision History
Revision 1.4, January 2022
Section
Change Summary
Demonstration Design
• Replaced steps 7-12 for “To program the MachXO2/MachXO3 device” with steps for
“Internal Flash Programming (MachXO2 and MachXO3LF)” and “SPI Flash Programming
(MachXO3L)” in Section 6.4. Programming a Demo Design with the Lattice Diamond
Programmer.
• Made keywords bold in Section 6.4. Programming a Demo Design with the Lattice
Diamond Programmer.
MachXO2 and MachXO3 Starter
Kit
• Changed the column heading from “MachXO3 Ball” to “MachXO2/MachXO3 Ball” in
Table 7.3. Expansion Header Pin Information (J3), Table 7.4. Expansion Header Pin
Information (J4), Table 7.5. Expansion Header Pin Information (J6), and Table 7.6.
Expansion Header Pin Information (J8).
• Changed “MachXO3L Ball” to “MachXO2/MachXO3 Ball” in Figure 7.4. J1 Header
Landing and LED Array Callout.
• Changed the column heading from “MachXO3 Pin” to “MachXO2/MachXO3 Pin” in
Table 7.9. JTAG Programming Pin Information, Table 7.10. SPI Programming Pin
Information, and Table 7.11. I2C Programming Pin Information.
Schematic Diagrams
Replaced schematic diagrams with high resolution ones.
Troubleshooting
Changed the heading of Section 8.4. to Restoring Original Demo Design.
Revision 1.3, September 2021
Section
Change Summary
All
• Changed document number from EB95 to FPGA-EB-02036.
• Updated document template.
• Added Disclaimers section.
• Changed document title from ‘MachXO3 Starter Kit’.
Acronyms in This Document
Added this section.
Introduction
Added references to the MachXO2 device and Starter Kit.
Features
Added references to the MachXO2 device and Starter Kit.
MachXO2 and MachXO3 Devices
• Changed section heading from ‘MachXO3 Device’.
• Added references to the MachXO2 device and Starter Kit.
• Added link for the MachXO2 Family Data Sheet to this section.
Demonstration Design
• Updated programming procedure in Programming a Demo Design with the Lattice
Diamond Programmer.
• Updated the LE25U40CMDTWG MFG Pin in step 10 of Section 6.3 Programming a Demo
Design with the Lattice Diamond Programmer.
• Added references to the MachXO2 device and Starter Kit.
• Added the download procedure the MachXO2 Starter Kit demo design and the link for
the MachXO2ZE Breakout Board to Section 6.2. Download Demo Designs.
MachXO2 and MachXO3 Starter
Kits
• Changed section heading from ‘MachXO3 Starter Kit’.
• Added references to the MachXO2 device and Starter Kit.
• Changed the figure caption of Figure 7.1. MachXO2 and MachXO3L/LF-6900C Block
Diagram from ‘MachXO3L/LF-6900C Block Diagram’.
• Added information regarding the component LCMXO2, including its schematic
reference and its description, to Table 7.1. Starter Kit Components and Interfaces.
• Added information regarding the MachXO2 expansion header pin to Table 7.3.
Expansion Header Pin Information (J3), Table 7.4. Expansion Header Pin Information
(J4), Table 7.5. Expansion Header Pin Information (J6), and Table 7.6. Expansion Header
Pin Information (J8).
• Changed the heading for Section 7.2.3. MachXO2/MachXO3 FPGA from ‘MachXO3
FPGA’.

Lattice Semiconductor MachXO2 Specifications

General

Brand	Lattice Semiconductor
Model	MachXO2
Category	Controller
Language	English