LAUNCH TECH X-431 PRO5 - Package List (Only for Gasoline & Diesel Configuration)

LAUNCH X-431 PRO5 User Manual
6
No. Item Descriptions Qt.
1 Display tablet
Indicates the test result.
1
2
SmartLink C device 1
3 Power adaptor 1
4 OBD II extension cable
Connects the SmartLink C device to the OBD II vehicle’s
DLC.
1
5 Charging cable (Type A-Micro)
Charges the tablet.
1
6 Data cable (Type A- Type B)
Connects the SmartLink C device to PC for J2534
programming.
1
7 Crossover cable
Connects the SmartLink C device to the modem.
8
Cigarette lighter cable
Supplies power to the non-16pin connector from the
vehicle’s cigarette lighter receptacle.
(Optional)
9
Battery clamps cable
Supplies power to the non-16pin connector from the
vehicle’s battery.
(Optional)
10
Non-16pin adaptor cable kit
Connects to the vehicle equipped with non-OBD II
management system.
(Optional)
1.5 Package List (Only for Gasoline & Diesel Configuration)
Common accessories are same, but for different destinations, the accessories (such as diagnostic software, testing
connectors) may vary. Please consult from the local agency or check the package list supplied with this tool
together.
No. Item Descriptions Qt.
1 Display tablet
Indicates the test result.
1
2
SmartLink C device 1
3 Power adaptor 1
4 OBD II extension cable
Connects the SmartLink C device to the OBD II vehicle’s
DLC.
1
5 Charging cable (Type A-Micro)
Charges the tablet.
1
6 Data cable (Type A- Type B)
Connects the SmartLink C device to PC for J2534
programming.
1
7 Crossover cable
Connects the SmartLink C device to the modem.
8 OBD I adaptor box
Connects the SmartLink C device and non-16pin adaptor
cable.
(Optional)
9
Cigarette lighter cable
Supplies power to the non-16pin connector from the
vehicle’s cigarette lighter receptacle.
(Optional)