LAUNCH
X-431 PRO5 User Manual
59
10.12.1 Units
It is designed to configure the measurement unit. Metric System and English System are available.
10.12.2 Shop Information
This option lets you define your print information. It mainly includes Workshop, Address, Telephone, Fax and
License Plate.
After inputting, tap
Save
.
Once you saved the print information, it will be entered automatically in the “Add Information” box every time you
save the diagnostic report.
10.12.3 Printer Set
This option enables you to establish a wireless connection between the tablet and Wi-Fi printer while performing
printing operations.
The App is compatible with the “LAUNCH Wi-Fi Printer” (sold separately) and “System” (external printer).
For LAUNCH Wi-Fi mini printer
, follow the steps below to connect the printer.
1. Tap
Printer Set
.
A. If it is the first time you have operated this printer, please proceed the following:
1. For initial use, you are suggested to reset the printer: Press and hold [MODE] & [FEED] for 8 seconds, the
following resetting command will be printed out:
at + default = 1
ok
at + reboot = 1
rebooting...
2. Tap
Reset
to configure Wi-Fi printer.
To Next Page
Loading...
