Launch X-431 Diagun User Manual

LAUNCH X-431Diagun User's Manual
35
Note: The registered user could log onto the member area, and click
"product control" to register the newly purchased product. See chapter
“Member login”.
The terms of service are shown on the screen. After reading and fully
understanding, click “I accept” to enter the interface as shown in the figure
below. Product serial number, register password and vendor code are
required.
Fill in Production Information
The serial No is on the X-431Diagun. The register password (should be kept
confidential) is provided in an envelope delivered with the product. The
vendor code is attached on the last page of the user’s manual. After the
information is filled, click "Next step".
Note:

Launch X-431 Diagun Specifications

General

Operating System	Android
RAM	2GB
Connectivity	Wi-Fi, Bluetooth
Ports	USB
Processor	Quad-core
Storage	16GB
Supported Protocols	CAN
Languages	Multiple languages
Battery	Rechargeable lithium-ion battery
Diagnostic Functions	Full system diagnosis, reading and clearing DTCs, data stream, actuation test, special functions (e.g., oil reset, EPB reset, SAS reset, TPMS reset, BMS reset, ABS bleeding, DPF regeneration, IMMO)