DISPLAY MEANING ACTIONS
The machine is filling the hydraulic circuit.
Wait for this operation to be successfully
completed.
The descaling filter must be replaced.
Request assistance from the service provider.
6.2. Machine programming (service provider)
To access the programming menu carry out the follo-
wing:
Turn the machine off using the on/off switch.
Turn the machine on using the on/off switch and while
the hourglass shows up, keep pressed the steam button
until the menu appears.
Attention
These menus are PASSWORD protected.
14
Manual code 10083445 / Rel. 0.00 / April 2010
Maintenance manual for technical assistance LB 2300-2301-2302-2311-2312
To Next Page
Loading...
