I
t is possible to access the internal components to
check their operation.
Attention
Now the machine has no shielding; in the machi-
ne there are electrical components and compo-
nent which generate heat. Be careful when ope-
rating under these conditions.
11.2. GACO gasket replacement
- Lever with a screwdriver to remove the gasket
cover;
- Remove the gasket with a screwdriver.
- After placing the new gasket, position the cover
again by hand and press until it is locked in posi-
tion.
41
Manual code 10083445 / Rel. 0.00 / April 2010
Maintenance manual for technical assistance LB 2300-2301-2302-2311-2312
To Next Page
Loading...
