2.2.
Audit
2.2.1.
Total from reset
2.2.1.4. Prod.3 from reset
Number of product type 3 (manual dose) dispen-
sed since the last Reset
2.2.1.5. Prod.4 from reset
Number of product type 4 (double espresso)
dispensed since the last Reset
2.2.1.6.Last reset (Read only) Date and time of the last Reset
2.2.1.7.Reset audit
Default: No
“Yes” deletes all values regarding the last
Reset
2.2.2.
Total from Init
2.2.2.1.Total from Init
(Read only) Number of product type 1,2,3 and 4
dispensed since the last initialisation
2.2.2.2.Prod.1 from Init
(Read only) Number of product type 1 (espresso)
dispensed since the last initialisation
2.2.2.3.Prod.2 from Init
(Read only) Number of product type 2 (long cof-
fee) dispensed since the last initialisation
2.2.2.4.Prod.3 from Init
(Read only) Number of product type 3 (manual
dose) dispensed since the last initialisation
2.2.2.5.Prod.4 from Init
(Read only) Number of product type 4 (double
espresso) dispensed since the last initialisation
2.2.2.6.Prod.
Last init
(Read only) Date and time of the machine initiali-
sation
2.3.
Brew unit wash
2.3.1.
Brew unit wash
Default: No
“Yes” starts the brew unit wash cycle
2.4.
Rinsing
2.4.1.
At the start?
Default: Yes
“No” deactivates the rinse cycle at every machi-
ne start-up.
Notes: The rinse cycle is performed at every
machine start-up only if the temperature of the
boiler is lower than 50°C; the cycle starts once
the warm-up phase has completed.
2.4.1.
Every 24 hours?
Default: Yes
“No” deactivates the rinse cycle every 24 hours.
19
Manual code 10083445 / Rel. 0.00 / April 2010
Maintenance manual for technical assistance LB 2300-2301-2302-2311-2312
To Next Page
Loading...
