Error code What has happened Possible cause Where to find the cause
81
Maximum effort for brewing.
The alarm can be reset by
switching the machine off
The motor has exceeded the maxi-
mum effort allowed to take the
brew unit to the dispensing posi-
tion (automatically performed only
after the secon
The capsule is blocked on the
brew unit
The brew unit is jammed or bloc-
ked
The previous capsule has not
been ejected
Gears blocked or sticking
82
Maximum effort for resting
The alarm can be reset by
switching the machine off
The motor has exceeded the maxi-
mum effort allowed to take the
brew unit to the resting position
The capsule is blocked on the
brew unit
The brew unit is jammed or
blocked
Gears blocked or sticking
83
Out of maximum time for
dispensing
The alarm can be reset by
switching the machine off
The brew unit has not been shif-
ted to the dispensing position
within the time predetermined by
the manufacturer
The gear motor power is insuffi-
cient and not appropriate
The microswitch for working posi-
tion is broken or disconnected
The motor of the gear motor does
not work properly or it is broken
The CPU board does not work
properly
The Power board does not work
properly (TRIAC)
The gears are broken
33
Manual code 10083445 / Rel. 0.00 / April 2010
Maintenance manual for technical assistance LB 2300-2301-2302-2311-2312
To Next Page
Loading...
