5.5 Adjustment of track eradicators
- The track eradicators (fig. 23) can be fitted behind the
wheels in 8 positions. The more severe the wheeling, the
deeper the track eradicators should be adjusted.
- If the POLYMAT has to be put down on a hard ground, the
track eradicators should be fitted with the coulters pointing
upwards.
5.6
Position of the machine
Throughout the operation, the POLYMAT needs to be in a
horizontal position. This position is ensured when the rim of
the hopper is horizontal.
- Adjust the machine in a horizontal position by means of the
top link (fig. 24).
When setting up the POLYMAT on a hard ground, wheeling
of the land wheels should be taken into account.
48
!
23
24
To Next Page
Loading...
