EXPLANATION OF SAFETY DECALS ON THE
MACHINE
• Carefully read operator’s manual before handling the
machine. Observe instructions and safety rules when
operating.
• Never exceed the maximum PTO speed which is obligatort
for the machine.
• Adjust the ball valve of the marker control to the closed
(TRANSPORT) position if the machine needs to be
transported.
• If you need to hoist the machine, only use such hoisting
points as are indicated by means of decals.
• Danger of rotating parts! Read the operating instruction of
the PTO shaft. Never work with a PTO shaft without
protection.
• Do not ride on the machine.
• Attention: marker may come down. Maintain a safe
distance.
38
To Next Page
Loading...
