Example:
required output 240 kg/ha (wheat)
• setting value according to chart = 70
• outcome of calibration test: 22 kg
• 22 x 10 = 220 kg/ha, which is approx. 8% less than
the output required
• increase the setting value by 8%, i.e. up to 76
- Carry out the test one more time, after having adjusted the
output setting.
- Fit the air supply hose back in position underneath the
metering device.
- Remove the handle from the gearbox and fit it on the
spindle for coulter pressure adjustment.
- Mount the drive shaft on the gearbox.
50
To Next Page
Loading...
