- Check all clamping constructions on the coulter beam for
tightness.
- Check the coulters for smooth pivoting.
- Check the blockage flails of the coulters for smooth
pivoting.
- Check the hoses for kinks and cracks.
- Check the machine for damage and flaws.
- Ensure correct tyre pressure:
Polymat 300: 190 kPa (1,9 bar) /
140 kPa (1,4 bar) as a minimum
Polymat 400: 200 kPa (2,0 bar) /150 kPa (1,5 bar) as a minimum
- Check V belts for condition and pressure (dismount
protection shield). V belt pressure should be so adjusted
that each belt can be pushed in about 18 mm by applying a
force of 50 N (5 kg) in the centre, between the pulleys
(fig. 46).
- Check the presence and condition of all safety decals
(fig. 47).
A
(P/N 9.1170.0408.0)
B (P/N 9.1170.0409.1)
C1 (P/N 9.1170.0125.4)
C2 (P/N 9.1170.0175.5)
D (P/N 9.1170.0173.3)
E (P/N 9.1170.0383.3)
F (P/N 9.1170.0393.6) : 2x
G (P/N 16.61.175)
60
E G
B
FD
C1
A
C2
46
18 mm
50 N (5 kg)
47
A
B
C
1/2
G
F
E
D
To Next Page
Loading...
