Safety measures and precautions
23
3.9.4 Check before departure
Before driving with the implement raised, lock the control lever, otherwise it may
drop and the implement may be unintentionally lowered.
Attach and check the transport equipment such as the lighting system, warning
signs and protective devices!
The actuating cables for the quick-release couplings of the tractor must hang
loose and must not actuate themselves in any position!
Before starting up and operating the implement, check the immediate vicinity
around it! Make sure that no-one is present in this area.
Ensure that visibility is adequate.
Observe permitted axle loads, total weights and transportation dimensions.
3.9.5 Correct behaviour in road traffic
When driving on public highways, observe the relevant statutory national regu-
lations.
Driving behaviour, steering and braking performance are influenced by ballast
weights.
Ensure that the tractor has adequate steering and braking performance.
When driving around corners, take into account the wide radius and the inertia
of the device.
It is prohibited to transport people on the device.
To Next Page
Loading...
